Most people who ask us about veneers have been thinking about it for years. They know roughly what they want. What stops them is not knowing what it will look like, not knowing what it will cost, and not wanting to grind down healthy teeth for something they can never take back.
3D-printed veneers answer all three. We design them digitally and print them in our own office here in Spring Hope, often removing as little as 0.3mm of tooth and on some cases nothing at all. And before we start anything, we can let you wear the result on your own face for a few days.
Start here
Wear your new smile before you buy it. We print a Smile Trial, a 0.3mm preview designed for your face, and bond it over your own teeth in about fifteen minutes. You wear it home for three to five days. You eat with it, photograph it, and show it to the people whose opinion you actually care about.
It is $300, and it comes off your treatment in full if you go ahead. Nothing permanent gets bonded until you have seen the look on your own face and told us you like it.
Start with a printed Smile Trial, or call (252) 478-3422 and ask for one.
What 3D-printed veneers actually are
A 3D-printed veneer is a thin shell bonded to the front of your tooth, the same as any dental veneer. What changes is how it is made.
Traditional porcelain veneers are hand-built by a ceramist at an outside lab, usually over two to three weeks. A 3D-printed veneer is designed on screen from a digital scan of your mouth and printed in-office from SprintRay Midas Restore, a ceramic-filled material that is FDA-cleared for permanent crowns, inlays, onlays and veneers. It is more than 60% ceramic by content, and it is a definitive restoration, not a temporary.
Three practical differences follow from that:
Speed
No shipping, no lab queue. The design and print happen here, in days rather than weeks.
Repairability
If a printed veneer chips, we can reprint that single tooth from the same digital file. With a hand-built lab case, a chip often means rebuilding more than the one tooth.
Cost
Printing in-house removes the lab bill, and that shows up in the price rather than in our margin.
How much of your tooth do we have to remove?
This is the question sitting underneath most of the hesitation, and it is the right question to ask. Enamel does not grow back. Whatever comes off is gone.
Traditional porcelain veneers generally need somewhere around 0.5mm to 1mm of enamel taken off the front and edge of each tooth, so the ceramic has room to sit without looking bulky. That is a real and permanent change to a healthy tooth.
A printed veneer can be made far thinner. Ours go as thin as 0.3mm, and on the right case we prep nothing at all. The material holds up at that thickness, which means we are often adding to your tooth rather than cutting it down.
Whether you are a no-prep candidate depends on where your teeth sit today. If they are crowded or pushed forward, we have to make a little room. If they are set back, worn short, small or spaced, there is frequently nothing to remove. We can tell you which of those you are from your scan, at the consultation, before you owe us anything. If you want the longer version of how we judge candidacy, we wrote it out on our no-prep and minimal-prep veneers page.
The upside is not only comfort. A tooth that keeps its enamel keeps its options. If you want something different fifteen years from now, you are starting from a tooth instead of a stump.
And because a no-prep case takes no drilling, no numbing and no temporaries, it is also the least expensive way we do veneers. The pricing below shows exactly what that difference looks like.
Why we print them here instead of sending them out
Spring Hope Family Dentistry runs a fully digital workflow. We scan, design and print under one roof, on equipment most practices our size in Nash County do not have.
That matters to you for a reason that has nothing to do with technology. The person who designs your smile is the person who bonds it in your mouth. There is no ceramist you will never meet interpreting a prescription, no shade note lost in transit, no second appointment because something came back wrong.
It also means that when you want a change, you get one. Move the edge, soften a corner, adjust the length. It is a file, not a package from a courier.
See your new smile before we start
This is the part patients tell us they did not expect.
Before you commit to anything, we can print a printed Smile Trial: a 0.3mm shell, designed for your face and temporarily bonded over your own teeth. It takes about fifteen minutes to place. Then you go home wearing it for three to five days.
You eat with it. You photograph it. You show the people whose opinion you actually care about. And then you decide, having seen the result rather than imagined it.
The Smile Trial is $300, credited in full toward your treatment if you go ahead. It is a deposit on your smile, not a fee for a consultation.
See it first, or we do not proceed
That is our promise on the Smile Trial, and we will put it in writing. If you wear the trial and you do not like your smile, we do not move forward. No pressure, no talking you round, no treatment plan sitting in your file waiting for you to change your mind. If the design is close but not quite right, we adjust the file and print it again. If it turns out not to be for you at all, we shake hands and you are out nothing but the cost of the trial.
What we will not do is promise you will love a result nobody has made yet. No honest dentist can promise that, and you should be wary of one who does. What we can promise is that you will see it on your own face before you buy it, and that the decision stays yours the whole way through.
What 3D-printed veneers cost in Spring Hope
We publish our prices. Not ranges, not “starting at”, not a number you have to sit through a consultation to hear.
| Option | Standard | With the VIP Plan |
|---|---|---|
| Printed veneers, no prep, 10 teeth | $7,000 | $5,600 |
| Printed veneers, prepped, 10 teeth | $14,000 | $11,200 |
| Lab-made porcelain veneers, 10 teeth | $18,000 | $14,400 |
Read that top row again, because it runs backwards to how dentistry usually works. The option that removes the least tooth is also the least expensive one. No prep means no drilling, no numbing, no temporaries and far less chair time, and we price it for what it is instead of charging you extra for the restraint.
What we will not do is let the price pick your tier for you. Whether you can go no-prep is a question about where your teeth sit right now, not about your budget. If your teeth are already prominent or crowded, bonding shells on top of them without making room gives you a bulky, obvious result, and we are not going to do that to you to save a few thousand dollars. We will tell you which row you are in once we have your scan, and we will tell you why.
These are package prices for ten teeth, and package means package. If a tooth needs a Vonlay rather than a veneer, meaning a restoration that wraps over the biting edge for more coverage, that is inside the price. If a tooth needs a buildup underneath it first, that is inside the price too. We are not going to design your smile, get you excited about it, and then come back mid-treatment asking for more money because your teeth turned out to need what teeth often need. One number, quoted up front, honored.
Which package applies to you is decided by three things: how your teeth are positioned now (that determines whether we can go no-prep), how many teeth you are treating, and whether you choose printed or lab-made porcelain. Ten teeth is where the package discount is deepest. A smaller case is priced per tooth instead, so eight teeth costs less than ten but not by as much as you might expect, because the savings come from doing the arch as one job.
The VIP Plan is $499 a year and takes 20% off any of them, which on a veneer case saves considerably more than it costs. There is more on what veneers cost in Spring Hope if you want the full breakdown.
Financing is available and we will tell you what you qualify for before you are in the chair, not after. For most people the real question is not the total, it is the monthly number, and that is a five-minute conversation we can have up front.
Printed or porcelain? An honest answer
We offer both, and we will tell you plainly which one we think fits your case.
Start with the thing most comparison articles get wrong. Both are definitive restorations. The material we print is cleared by the FDA for permanent crowns, onlays and veneers, and it is over 60% ceramic. It is not a temporary, it is not a long-term provisional, and it is not something we plan on swapping out in two years. We bond it expecting it to last, the same way we bond porcelain.
| 3D-printed | Lab porcelain | |
|---|---|---|
| Made | In our office | By an outside ceramist |
| Timeline | Days, sometimes same day | Two to three weeks |
| Tooth removed | As little as 0.3mm, sometimes none | Usually 0.5mm to 1mm |
| Status | Definitive, FDA-cleared | Definitive |
| Published track record | Newer material, data still accumulating | Decades of clinical history |
| If one chips | Reprint that single tooth | Often rebuild more than one |
| Light and depth | Very good | The benchmark for realism |
| Cost, 10 teeth | $7,000 no prep, $14,000 prepped | $18,000 |
The honest difference is not how long each is built to last. It is how long each has been measured. Porcelain has thirty years of published follow-up behind it. Printed ceramic-filled restorations have a few, and the early clinical results are good, but the library is smaller. We would rather say that out loud than pretend the two stacks of evidence are the same height.
Printed veneers earn their place when keeping your own tooth structure matters, when speed matters, when budget matters, or when you want the freedom to adjust or reprint a tooth without starting the case over.
Porcelain earns its place when we are chasing the last few percent of optical realism on a front tooth, when your bite is unusually heavy, or when you simply want the material with the longest paper trail.
Who this is not right for
Veneers are cosmetic. They do not fix problems underneath them.
If you have active decay, gum disease that is not yet stable, or a bite that is doing damage, those come first. Grinding and clenching in particular will shorten the life of any veneer, printed or porcelain, and we will talk about protecting your investment before we place one. Cases where the bite itself is the problem are usually a full-mouth rehabilitation conversation rather than a veneer one.
We would rather tell you that at the consultation than have you find out in year two.
Dr. Abboud’s Take
What sold me on these was not the speed. It was how little tooth we have to take.
A traditional veneer prep removes a millimeter or so of enamel off the front of a healthy tooth, and you do not get that back. A printed veneer can be as thin as 0.3mm, and on the right case we do not prep at all. That changes what the decision even is. You are not committing to reshaping your teeth, you are adding something to them.
The rest of it is what patients get excited about, and fairly so. We design it here, we print it here, and on some cases we can seat it the same day, at a price that lets a lot more people actually say yes. But the part I care about is that when it is done, the tooth underneath is still mostly yours.
Elie Abboud, DDS
Frequently asked questions about 3D-printed veneers
How long do 3D-printed veneers last?
They are built to last, not to be replaced in a couple of years. The material is FDA-cleared as a definitive restoration and we bond it with the same expectations we have for porcelain. The honest caveat is that porcelain has decades of published follow-up and printed veneers have a few, so nobody can hand you a thirty-year study on them yet. What we can do is watch yours at every checkup, and if something ever does go wrong, your design is a file we can reprint.
Do I have to get my teeth shaved down for printed veneers?
Much less than for traditional veneers, and sometimes not at all. Printed veneers can be made as thin as 0.3mm, against the 0.5mm to 1mm of enamel a porcelain veneer usually needs. Whether you are a no-prep candidate depends on where your teeth sit now, and we can tell you from your scan at the consultation.
Do 3D-printed veneers look fake?
Modern ceramic-filled resins have a natural gloss and translucency, and most people cannot tell. Porcelain still has a slight edge in how it handles light at depth. The Smile Trial exists so you can judge that on your own face instead of taking our word for it.
What happens if I do not like the design?
We change it, and if it is still not right, we stop. That is the entire reason the Smile Trial comes first. You wear the preview home before anything permanent is bonded, and if the shape, length or shade is not what you pictured, we adjust the file and print it again. If veneers turn out not to be for you at all, we do not move forward and there is no pressure to. Nothing gets bonded for good until you have seen it on your own face and said yes.
How much do 3D-printed veneers cost near Spring Hope?
$7,000 for ten no-prep printed veneers, or $14,000 for ten prepped ones. With the $499 VIP Plan those become $5,600 and $11,200. Lab-made porcelain is $18,000. Those are all-inclusive published prices and you do not have to sit through a consultation to hear them.
Is anything going to be added to the price later?
No. The package price covers what your case clinically needs, including a Vonlay in place of a veneer where a tooth needs more coverage, and any buildup required underneath. We quote one number up front and we honor it. The only thing that changes the figure is you changing how many teeth you want treated.
Why do no-prep veneers cost less than prepped ones?
Because there is less to do. No drilling, no anesthetic, no temporaries to wear while something is being made, and fewer chair hours. We pass that through rather than charging the same for less work. Which tier you are in is decided by your teeth, not your budget.
How many appointments does it take?
Far fewer than lab veneers, because there is no shipping or lab queue. We will map out your exact schedule at your consultation once we have seen your scan.
Can I see what they will look like first?
Yes, and we think you should. The $300 Smile Trial is a printed preview you wear home for three to five days. It is credited in full toward your treatment.
Does insurance cover veneers?
Veneers are usually considered cosmetic, so most plans do not cover them. We are out of network and will file on your behalf as a courtesy. Financing is available, and we can tell you what you qualify for before you commit to anything.
Can 3D-printed veneers be repaired?
Usually yes. Because your design is a digital file, a damaged tooth can often be reprinted individually rather than rebuilding the whole case.
Ready to see what your smile could look like?
You do not have to decide anything today, and you do not have to decide anything on a screen either. The honest first step is a printed Smile Trial: $300, credited in full, worn home for three to five days, with nothing permanent bonded until you have seen it and approved it. Most people who come in unsure walk out having already answered their own question.
We are at 615 E Nash St in Spring Hope, and we see patients from Rocky Mount, Nashville, Wilson and across Nash County.
Call (252) 478-3422 or book online.